Its going on the driver side barn door. The left side takes up most of the space between the hinges about 12.5" then the right side is about 5" tall.
Its built flat and has a piece of angle iron to space it away from the door. Eh enough trying to explain it i drew a crude pic in MS paint then stole the blueprint pic from another thread. I would have taken real pics but it still isnt finished and I didnt have my camera today. I will get pics once it is installed.
![Image](http://i12.photobucket.com/albums/a202/originalbalzer/astro/sparemount.jpg)
I also added a small tab on the driver side for a future CB antana mount.
OK question. This is simular to other I have seen does anyone have one like it and if so did you put any kind of rubber or anything between the mount and your paint? Also on the right side how much of a backing plate should I use? I was thinking 2"x6" plate that would be 1/2"bigger than the outside mount all the way around.
Later I think I will build a off road style roof rack, possibly some side bars (rock sliders) to protect the rocker pannels. Who knows what all I will build, I just like to make stuff myself.