Unflip a flip kit!

FROM FIBERGLASS MONOLEAFS TO AIR BAGS, STOCK HEIGHT TO BODY SLAMMED, EVERYTHING EXCEPT LIFTS GO HERE.

andyfanshawe
I finally get the smurf thing
Posts: 102
Joined: Thu Jan 31, 2008 11:59 am
Location: Chesterfield, UK

Re: Unflip a flip kit!

Post by andyfanshawe »

Hi Mr Singh.
Just came across this post. I live in the UK also (Derbyshire - J29 of M1). In about 4 weeks I am going to fit a flip kit (and dropped spindles) to one of my mates Astro 2WD van. So, I would have thought there should be stock parts available.
I can contact him if you are interested to see what he says.

Andy.
Image

86 Air ride Camaro and soon to be Air Astro!

Topic author
Mr Singh
I finally get the smurf thing
Posts: 108
Joined: Sun Jan 13, 2008 7:53 am

Re: Unflip a flip kit!

Post by Mr Singh »

Hi Andy!

Yes please! if you could hold onto the stock pieces that would be great!

If he hasn't already he can buy my flip kit and do a swap?

Cheers!
Am
1997 2WD Chevy Astro
User avatar

Merlin
I finally get the smurf thing
Posts: 144
Joined: Sun Sep 10, 2006 6:12 pm
Location: Ventura, CA.

Re: Unflip a flip kit!

Post by Merlin »

I could be wrong but in the third picture of your vans springs, the one showing the rear of the left side, it looks like the spring is bent right at the shackle. I took a look at my van and the spring isn't at the angle yours looks like it is. This would make the van set lower. Does anyone else think the same? It could just be the angle you took the picture at too.
1989 RS Astro, V-8 and maybe a shift it myself tranny, still deciding on this one. Dutch doors, Cad tail lights, shaving the rest now. 12 bolt rear end was in the van when I got it but changing how it sets to lower.

andyfanshawe
I finally get the smurf thing
Posts: 102
Joined: Thu Jan 31, 2008 11:59 am
Location: Chesterfield, UK

Re: Unflip a flip kit!

Post by andyfanshawe »

Mr Singh wrote:Hi Andy!

Yes please! if you could hold onto the stock pieces that would be great!

If he hasn't already he can buy my flip kit and do a swap?

Cheers!
Am
I'll let you know asap.

Andy.
Image

86 Air ride Camaro and soon to be Air Astro!

Topic author
Mr Singh
I finally get the smurf thing
Posts: 108
Joined: Sun Jan 13, 2008 7:53 am

Re: Unflip a flip kit!

Post by Mr Singh »

Clive has PM'd me on Astrovans UK forum.

Thanks :supz:
1997 2WD Chevy Astro

Topic author
Mr Singh
I finally get the smurf thing
Posts: 108
Joined: Sun Jan 13, 2008 7:53 am

Re: Unflip a flip kit!

Post by Mr Singh »

Mission accomplished thanks to Joe :)

Thats with around 1000lbs loaded in. Another 2000lbs or so to go in. Will use the Airlift bags to give it some support when it comes down.
Last edited by Mr Singh on Fri Jan 09, 2009 9:06 am, edited 1 time in total.
1997 2WD Chevy Astro
User avatar

violent b
I finally get the smurf thing
Posts: 115
Joined: Fri Jun 08, 2007 9:31 am
Location: Deland, Fla.

Re: Unflip a flip kit!

Post by violent b »

Hi Am,

so the rear end of your van is stock with 1,000 pounds in it? It doesn't look like it has went down very much. I might have to do this also, I have a huge stereo system going in and I have a flip kit right now. Looks like I'll be changing back to the stock.
keep the updates coming.

Bill
The Midget and Monkey madman!

Topic author
Mr Singh
I finally get the smurf thing
Posts: 108
Joined: Sun Jan 13, 2008 7:53 am

Re: Unflip a flip kit!

Post by Mr Singh »

Hi Bill

The before pic was with the flip kit install + 1000lbs it was pretty close to being bottomed out and looking like needing a c-notch.

Put the rear back to stock ride height and hey presto I have lots more clearance. It all looks a little exagerated since the front is very low, not going to lift the front.. Want to retain a good stance once all is said and done. The Billet rims are at the polishers being re-done with some Extra Load tyres with a slightly wider and bigger profile, not too much but a decent compromise on things.
1997 2WD Chevy Astro
User avatar

SoCalli V8
Retired
Retired
Posts: 1209
Joined: Wed Sep 20, 2006 5:42 pm
Location: Lost Angels, Sovern KarlyFornia.

Re: Unflip a flip kit!

Post by SoCalli V8 »

Wow, Blue skies in England.... thats a rare sight.


Oh and your van looks great now also.... Mr Singh.
`86 V8 Lowered Cargo, extensively modified, shaved bald, wearing the shortest, sluttyest white primer dress....

A British Wanker living in So KarlyFornia.
My Astro tows my toys to Glamis sand dunes http://www.youtube.com/watch?v=jp2pqjQtpso
First ever canal jump at Glamis http://www.youtube.com/watch?v=oXZjM84x_Xc

Topic author
Mr Singh
I finally get the smurf thing
Posts: 108
Joined: Sun Jan 13, 2008 7:53 am

Re: Unflip a flip kit!

Post by Mr Singh »

Thanks mate, yes thats September Vs. December!

We had one hell of a great summer........NOT! #-o
1997 2WD Chevy Astro
User avatar

blk lt awd
I sleep in my van
Posts: 336
Joined: Mon Sep 25, 2006 10:09 pm
Location: VANcouver
Contact:

Re: Unflip a flip kit!

Post by blk lt awd »

i gotta say i love the color combo on your van. got any pics of the system set up so far?
1995 Black LT AWD
2000 Ninja ZX-6R
2003 Mazdaspeed Protege (spicy)
1961 Impala...gone but not forgotten.

http://www.propertystation.ca/

Topic author
Mr Singh
I finally get the smurf thing
Posts: 108
Joined: Sun Jan 13, 2008 7:53 am

Re: Unflip a flip kit!

Post by Mr Singh »

I'll make a build thread blog on here soon. :yawinkle:
1997 2WD Chevy Astro
Post Reply