door pins & bushings
-
Rileysowner
- I plan to be buried in my van
- Posts: 1290
- Joined: Sat Sep 09, 2006 7:14 pm
- Location: Exeter ON
- Contact:
Re: door pins & bushings
I have the tool to remove the springs as the driver's side bushings are a little worn, but I don't have what I need to support the door while it is unhooked right now, so I figured keeping the pin from falling out would work for now.
"I have a torque wrench and I am not afraid to use it."
Jim
1997 GMC Safari RWD, Power Windows and Locks, 7 passenger, a/c, rear heat
http://rileysowner.blogspot.com/
Jim
1997 GMC Safari RWD, Power Windows and Locks, 7 passenger, a/c, rear heat
http://rileysowner.blogspot.com/
-
Cobra
- ASV Supporter
- Posts: 1750
- Joined: Sat Jun 16, 2007 2:31 pm
- Location: Toronto, Ontario
- Has thanked: 1 time
- Been thanked: 1 time
Re: door pins & bushings
that's the only reason i took it to mechanic no one to help me while doing the work and i wasn't about to build something to support the door
1998 GMC Safari AWD, BFGoodrich AllTerrain T/A
Jet performance tuner 91 octane preset, Jet under-drive pulleys
Rancho 999000 series shock, on-board controller to be installed later
DHC rock rails and skid plate Add-A-Leaf
G3500 front calipers
Zexel Torsen Diff
11" drums
180 amp Alternator
Long tru-cool 4590 trans cooler
1997 gone
Jet performance tuner 91 octane preset, Jet under-drive pulleys
Rancho 999000 series shock, on-board controller to be installed later
DHC rock rails and skid plate Add-A-Leaf
G3500 front calipers
Zexel Torsen Diff
11" drums
180 amp Alternator
Long tru-cool 4590 trans cooler
1997 gone
-
dj_joker_2002
Topic author - I finally get the smurf thing
- Posts: 134
- Joined: Wed Sep 13, 2006 3:19 pm
- Location: New Hampshire
- Contact: