That would be me. Jim and I have been pming each other about this over the last few days. He just pm'd me you thread! If you still have those stock fender fillers, I'd love to relieve you of some clutter how much do you want for them shipped to Stevensville, MI? Can you PM me? Thanks a BUNCH Jim for sending me to this thread
~Scott & Heather
2001 Astro AWD LT All about me, my girl, & our van with loads of pics: viewtopic.php?f=20&t=5281
I removed my doors so that it would be easier to complete my lower fender mod, plus I wanted to re-do my inner fender inserts to make them perfect and I also wanted to fit new door pins and bushings because my old ones were worn. It also makes it easier to prep the door jambs and the door for paint.
A much smoother look.
`86 V8 Lowered Cargo, extensively modified, shaved bald, wearing the shortest, sluttyest white primer dress....
lookin clean! my only concern would be "what if you ever need to remove your fenders or replace them?"
99 SLT Safari AWD, G80/GT4 rear, Burgundy, 196,000 and counting (strictly AMSOIL) flowmaster 40series muffler no more cat, K&N Kone Filter, roll pan, 255/60/15 rubbers mounted to 15x8.5 inch American Racing Tailgunner wheels, billet grille, CB Radio, Alpine Deck, Shag carpet, the list goes on....
03 Chevy Silverado 2500HD, LB7 Duramax Diesel, 5 speed Allison Tranny, Crew Cab Long Bed, no muffler or cat, 4 inch turbo back and side piped. not too many other mods yet, also addicted to AMSOIL.
99 SLT Safari AWD, G80/GT4 rear, Burgundy, 196,000 and counting (strictly AMSOIL) flowmaster 40series muffler no more cat, K&N Kone Filter, roll pan, 255/60/15 rubbers mounted to 15x8.5 inch American Racing Tailgunner wheels, billet grille, CB Radio, Alpine Deck, Shag carpet, the list goes on....
03 Chevy Silverado 2500HD, LB7 Duramax Diesel, 5 speed Allison Tranny, Crew Cab Long Bed, no muffler or cat, 4 inch turbo back and side piped. not too many other mods yet, also addicted to AMSOIL.
This was a 1 component spot putty, because at the time I needed a bondo that was very thin, thinner than 2 comp bondo because I only needed to correct some slight low spots. Was this wrong of me to use this 3M spot putty in large amounts? it was never laid on thick.
Next I wanna shoot some filler primer and block it down perfectly flat, like you posted at AS UK with the black mist coat over the top.
`86 V8 Lowered Cargo, extensively modified, shaved bald, wearing the shortest, sluttyest white primer dress....
I avoid using 1comp products as they can be dissolved by the next layer you put on. IF I use putty, it is not on larger areas than the 10 by 10 mm, and really thin.
What brand of products do you use for the primer you have on now and the filler you going to shoot on?
SoCalli V8 wrote:
Next I wanna shoot some filler primer and block it down perfectly flat, like you posted at AS UK with the black mist coat over the top.
I tried to make a "Paint" topic here too. But what ever I do, it will not upload my pics.
I make really small pics, but it´s "over quota".
You need to have your pics 'hosted' which means 'stored' so that you can use them on any website, 640 x 480 is the perfect size for posting. Set up a free account with http://www.photoshop.com then you can post up nice large pictures for everyone to see instantly.
`86 V8 Lowered Cargo, extensively modified, shaved bald, wearing the shortest, sluttyest white primer dress....
SoCalli V8 wrote:You need to have your pics 'hosted' which means 'stored' so that you can use them on any website, 640 x 480 is the perfect size for posting. Set up a free account with http://www.photoshop.com then you can post up nice large pictures for everyone to see instantly.
how much do you want for them shipped to Stevensville, MI? Can you PM me? Thanks a BUNCH Jim for sending me to this thread 
