Matt's New Shop

Non technical and off-topic discussion
User avatar

MrJames
I finally get the smurf thing
Posts: 230
Joined: Thu Nov 10, 2011 9:47 am

Re: Matt's New Shop

Post by MrJames »

mdmead wrote:You are obviously more of an expert than I. That being said, I'm not concerned with this pour... and I hope you don't lose any sleep over it either. :muhaha:
I hope you understand that my comments are a reflection of your contractor's work and not of you. Without your pictures, I can't see it from here and it looks very fine (perfect) that way.

I also comprehend that you were not on site to define or direct the work yourself. I am pleased that you are pleased and will now sleep well knowing it is history building on non set up concrete. Oh how nice it is to get the fast inexpensive buck.

Pour On ! :partyman:

I will just lurk now.

astrozam
I have my van tatooed on my cheeks
Posts: 2770
Joined: Fri Sep 08, 2006 2:57 am
Has thanked: 1 time
Been thanked: 2 times

Re: Matt's New Shop

Post by astrozam »

Enjoying the pics Matt, keep um coming bro :cheers:
User avatar

Topic author
mdmead
ASV Supporter
ASV Supporter
Posts: 2153
Joined: Sun Sep 10, 2006 6:45 pm
Location: Selah, WA
Been thanked: 1 time
Contact:

Re: Matt's New Shop

Post by mdmead »

MrJames wrote:
I will just lurk now.
That's probably a good idea...
Matt
Selah, WA
-96 GMC Safari AWD Hi-Top Conversion -->Stalled 5.3L swap & 5" lift
-74 Ford Bronco -->Far from perfect but mine!
-99 V-10 Ford Super Duty Super Cab 4x4 -->Stock with 285 Cooper ATs
-00 Ford Focus Wagon -->The Red Turd
-95 Ford 24' Class C Motorhome -->My big block sleeper
-07 Can-Am Outlander XT -->My yellow 4x4 quad for work & play
-04 Ski Doo REV Summit -->Still several chassis behind!


No new projects until the current ones are done!
User avatar

the beast
I am merely driving my van
I am merely driving my van
Posts: 17
Joined: Thu Dec 08, 2011 3:53 pm

Re: Matt's New Shop

Post by the beast »

hey Matt,
really enjoying this post keep it running mate and keep your pictures coming too . . . . its really taking shape.

pete.
Image
the beast
User avatar

peter
ASV Supporter
ASV Supporter
Posts: 1354
Joined: Wed Sep 20, 2006 7:41 pm
Location: Montreal, Quebec, Canada
Contact:

Re: Matt's New Shop

Post by peter »

I just can't believe that you had the audacity to build a bigger garage than mine. Definitely not appreciated....

Awesom how quickly this thing's going up. Heating it will prolly bankrupt you. Couldn't happen to a nicer guy. :whistle:
"Just keep swimming..."
97' 4wd Safari
ZZ 502 Ramjet
4"L"80E/NP241C
Ford 9"


Kinky is using a feather.
Perverted is using the whole chicken.

"Laws that forbid the carrying of arms... disarm only those who are neither
inclined nor determined to commit crimes".
- Thomas Jefferson
User avatar

Topic author
mdmead
ASV Supporter
ASV Supporter
Posts: 2153
Joined: Sun Sep 10, 2006 6:45 pm
Location: Selah, WA
Been thanked: 1 time
Contact:

Re: Matt's New Shop

Post by mdmead »

About 7pm on Tuesday night, the wind kicked up and blew hard for a few hours. I was glad the rafters were all up as I knew the structure was a lot sturdier.

As soon as daylight hit on Wednesday, I took a few pics to see what the guys had accomplished on Tuesday afternoon after I left. Pretty impressive!

Image
Image
Image
Image
Image

First up was cutting off the excess of the posts. Nothing high-tech here!

Image
Image

Next time I looked out, the roofing insulation was in place and the roof panels were going up/on.

Image
Image
Image
Image

All the panels in place.

Image
Image

The rest of the day was spent putting LOTS of screws in the roof, installing a ridgecap and then enclosing the soffits.

I did splurge and go with a 24" overhang all the way around. I don't recall the exact cost, but it was at least a couple of grand. But it looks so much better and was really important off the front to move the water away from the door.
Matt
Selah, WA
-96 GMC Safari AWD Hi-Top Conversion -->Stalled 5.3L swap & 5" lift
-74 Ford Bronco -->Far from perfect but mine!
-99 V-10 Ford Super Duty Super Cab 4x4 -->Stock with 285 Cooper ATs
-00 Ford Focus Wagon -->The Red Turd
-95 Ford 24' Class C Motorhome -->My big block sleeper
-07 Can-Am Outlander XT -->My yellow 4x4 quad for work & play
-04 Ski Doo REV Summit -->Still several chassis behind!


No new projects until the current ones are done!

LiftedAWDAstro
I have my van tatooed on my cheeks
Posts: 4379
Joined: Sat Sep 09, 2006 3:35 pm
Location: New Haven, NY

Re: Matt's New Shop

Post by LiftedAWDAstro »

Looking great! I can't wait until the time comes when I can afford to build a nice working garage! :supz:
Current rides:
2013 Toyota Tundra DC 4x4
2008 Dodge Nitro 4x4
2005 Nissan Sentra 1.8S Special Edition

Mileage spreadsheet

Vans owned:
1986 Safari 2.5L 4 speed manual - scrapped
1995 Astro 2WD conversion 4.11 posi, shift kit, DHC rock rails - sold to Skippy
1998 Astro 4x4 D44, D60, NP231, full hydraulic system with 9k# Milemarker winch and snow plow - sold to Lockdoc
2003 Astro AWD all stock - traded for a 3/4 ton truck
2005 AWD, 4.10's - sold to skippy

kamenz
I get chills without my van.
Posts: 91
Joined: Wed Jun 13, 2007 9:20 pm
Location: Sammamish,WA

Re: Matt's New Shop

Post by kamenz »

Matt,since you are in the process to improve this lousy economy you might as well consider to upgrade your fleet to store in this new garage/work shop. :-k
Kamenz

1998 Astro AWD Conversion
User avatar

Topic author
mdmead
ASV Supporter
ASV Supporter
Posts: 2153
Joined: Sun Sep 10, 2006 6:45 pm
Location: Selah, WA
Been thanked: 1 time
Contact:

Re: Matt's New Shop

Post by mdmead »

LiftedAWDAstro wrote:Looking great! I can't wait until the time comes when I can afford to build a nice working garage! :supz:
Yeah, I"ve been dreaming about a shop for nearly 10 years, ever since we moved here to Selah. At our old house, I was just considering a small two car garage, probably in the 24'x24' range. After moving to our current property, I realized I needed to think BIGGER. But there was that cost problem... Well, cost is still an issue, but the timing was right. But as I wandered around in the building tonight, I see a whole bunch of more work that needs to be done... insulated walls, electrical, etc., and the costs invoved. Yikes! :yikes:
Matt
Selah, WA
-96 GMC Safari AWD Hi-Top Conversion -->Stalled 5.3L swap & 5" lift
-74 Ford Bronco -->Far from perfect but mine!
-99 V-10 Ford Super Duty Super Cab 4x4 -->Stock with 285 Cooper ATs
-00 Ford Focus Wagon -->The Red Turd
-95 Ford 24' Class C Motorhome -->My big block sleeper
-07 Can-Am Outlander XT -->My yellow 4x4 quad for work & play
-04 Ski Doo REV Summit -->Still several chassis behind!


No new projects until the current ones are done!
User avatar

WoodButcher
ASV Supporter
ASV Supporter
Posts: 425
Joined: Wed Apr 06, 2011 7:01 pm
Location: Woodbury, CT.
Has thanked: 2 times
Been thanked: 18 times

Re: Matt's New Shop

Post by WoodButcher »

Nice, your contractor lucked out with good weather. The one I built was pure misery, cold rain and sleet to start then a foot plus of snow, wind and temps in the teens. That is the same kit I used but you have a heavier roof structure. I would imagine for a heavier snow load, where you have double trusses at the posts we did not. Our top truss member was 2x6" and the purlins 2x4" . We had to hang the trusses individually and frame in the air.

You'll have no problems with the footings. Hand mixed concrete is acceptable for these kits. As you noted the compactor was running full time so your pad is adequate. These kits are engineered to a point a homeowner could almost do it himself, everything is spelled out, in simple instructions and made as close to foolproof as can be, they have indivdual online and or telephone support for first timers like me. 1 (800) is a good thing to have when the building inspector wants to change the game plan,,,

The only issue I ran into were the entry doors. As they were installed into wet, green, PT lumber that twisted the first time it got a chance to dry. I went back 6 months later, reset the doors and they've been good since.
'93 Safari shorty, 350 swap
'05 Astro AWD, lifted, 6 liter, cammed, ported and programmed for fast.
'93 cargo, work in progress
User avatar

Topic author
mdmead
ASV Supporter
ASV Supporter
Posts: 2153
Joined: Sun Sep 10, 2006 6:45 pm
Location: Selah, WA
Been thanked: 1 time
Contact:

Re: Matt's New Shop

Post by mdmead »

That's it. Done. Shows over. You can all go home.

Well, just about!

On Thursday, the 4-man crew finished up.

Entry door installed in the morning.

Image

Siding going up!

Image

Image

Image

Image

Image

Image

Image

My wife and I headed off to see the latest Mission Impossible flick about 2:15pm. We didn't get home until around 6pm, and I then went out with my flashlight to look around. I was surprised to see it looked like the crew was done and gone. (But since the Bobcat was gone, I figured that was the case.)

This morning I went out and took a good look around and sure enough, they had finished up!

Image

Image

Image

Image

Image

Image

Image

I was suprised that there was a doorknob installed and the keys left hanging. I guess they build complete!

Image

Right now, my impression is that this work crew was one class act. It was obvious during the build everyone was experienced and knew what they were doing. I have not found one ding in the siding, a mis-cut or anything else.

They even left the jobsite in great shape, piling all the waste into a couple of neat piles. (I was informed before the build while signing the contract, I would be responsible for the end trash.)

Image
Image

This afternoon I walked over to the neighbors place behind us to see what it looked like from over there. It's noticeable!

Image

Image

My salesman, Ray, stopped by the jobsite yesterday to check on the progress and check in with me. (He chatted with my mother-in-law since we weren't there.) I expect to hear from him in the next day or two and will get an update regarding door installation and see about getting my floor poured.

But for now.... that's it!
Matt
Selah, WA
-96 GMC Safari AWD Hi-Top Conversion -->Stalled 5.3L swap & 5" lift
-74 Ford Bronco -->Far from perfect but mine!
-99 V-10 Ford Super Duty Super Cab 4x4 -->Stock with 285 Cooper ATs
-00 Ford Focus Wagon -->The Red Turd
-95 Ford 24' Class C Motorhome -->My big block sleeper
-07 Can-Am Outlander XT -->My yellow 4x4 quad for work & play
-04 Ski Doo REV Summit -->Still several chassis behind!


No new projects until the current ones are done!
User avatar

Smiliesafari
ASV Supporter
ASV Supporter
Posts: 2667
Joined: Sat Dec 02, 2006 12:34 pm
Location: Orlando, FL

Re: Matt's New Shop

Post by Smiliesafari »

:supz: \:D/ :supz: \:D/ Break out the champagne..........It just doesn't get any better.
1996 Safari SLX Hotair balloon transport vehicle
User avatar

okie1
I sleep in my van
Posts: 252
Joined: Mon Nov 21, 2011 6:05 am
Location: central Oklahoma
Been thanked: 3 times

Re: Matt's New Shop

Post by okie1 »

You are a lucky dude, they did an excellent job

astroturf
ASV Supporter
ASV Supporter
Posts: 1658
Joined: Wed Sep 09, 2009 6:25 pm

Re: Matt's New Shop

Post by astroturf »

Congrats and Merry Christmas Matt & Family

Jim
User avatar

peter
ASV Supporter
ASV Supporter
Posts: 1354
Joined: Wed Sep 20, 2006 7:41 pm
Location: Montreal, Quebec, Canada
Contact:

Re: Matt's New Shop

Post by peter »

Awesome build, Matt. I enjoyed watching this being built. Will you be working on the wiring etc during the holidays?

Coupla questions;

- Water supply, drains and 240v power? From where and into where?
- Styrofoam, fibreglas or sprayed-urethane insulation?
- Windows, or are you going windowless for higher security?
"Just keep swimming..."
97' 4wd Safari
ZZ 502 Ramjet
4"L"80E/NP241C
Ford 9"


Kinky is using a feather.
Perverted is using the whole chicken.

"Laws that forbid the carrying of arms... disarm only those who are neither
inclined nor determined to commit crimes".
- Thomas Jefferson
Post Reply