Gonna need to test drive ... hand over the key! heh he
How is she running?
Stephanie's Project V-8 RS
Re: Stephanie's Project V-8 RS
97' Safari AWD SLT - Nicknamed "Princess" cause of all the TLC she begs from me!
Location: West Coast, B.C., Canada eh?
Photos and Specs of "Princess"
Location: West Coast, B.C., Canada eh?
Photos and Specs of "Princess"
Re: Stephanie's Project V-8 RS
that engine and transmission are just absolutely a work of of art. 
'89 Astro, 4.3L, TBI. Minor intake and exhaust mods. Rebuilt 700R4 trans (by me). Corvette servo, 0.5" boost valve, police grade 1-2 accumulator spring (shifts fast and solid). B&M stacked plate trans cooler. Bilstein shocks. Belltech sway bars front and back. New head unit, speakers and subwoofer. Needs paint and a new headliner.
name's Steve
I can't remember all I've forgotten about that....
name's Steve
I can't remember all I've forgotten about that....
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
The past little bit has been busy & we are
slowly picking away at it.
Accessory brackets were so ugly there was no way we were going to
install them the way they were.
So we stripped em down,cleaned them up
& cleaned the alternator/brackets,check pulley bearings,painted the pulleys/access.Brackets
& hit it with clearcoat.That ate up 4 days,Then installed them.
Headers & exhaust installed,Used new copper gaskets,New ARP stainless header
bolts,Made up a new 3 wire 02 sensor harness,installed it,went into the wiring
& relocated/cleaned up area's that I did not approve of & keeping things away
from the headers -Deal with things now,rather than later.
Dropped her down back on to it's two front feet,
Its on all 4's & looks good.Today I bought MSD leads,Cap & Rotor,To be installed later on.
There's allot more loose ends that were completed but it would take forever for me
to type it out - On to the pics
slowly picking away at it.
Accessory brackets were so ugly there was no way we were going to
install them the way they were.
So we stripped em down,cleaned them up
& cleaned the alternator/brackets,check pulley bearings,painted the pulleys/access.Brackets
& hit it with clearcoat.That ate up 4 days,Then installed them.
Headers & exhaust installed,Used new copper gaskets,New ARP stainless header
bolts,Made up a new 3 wire 02 sensor harness,installed it,went into the wiring
& relocated/cleaned up area's that I did not approve of & keeping things away
from the headers -Deal with things now,rather than later.
Dropped her down back on to it's two front feet,
Its on all 4's & looks good.Today I bought MSD leads,Cap & Rotor,To be installed later on.
There's allot more loose ends that were completed but it would take forever for me
to type it out - On to the pics
Last edited by reaper on Thu Nov 04, 2010 10:45 pm, edited 2 times in total.
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
Re: Stephanie's Project V-8 RS
Hey dumb question what'd you swipe the bracket on the passenger side off of? I think it may solve a problem of mine.
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
90 astro stock bracket,Mr_Roboto wrote:Hey dumb question what'd you swipe the bracket on the passenger side off of? I think it may solve a problem of mine.
If you need one I have a spare.
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
Re: Stephanie's Project V-8 RS
Could you do me a favor and set it on a flat surface so the bolt holes are flush then measure the distance to the edge of the pulley or take a pic? I know I've lost it but right now I've got an issue because the spacing of the Camaro bracket I have is different than the truck bracket and under drive pulley I have. Frickin odd I realize but still.
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
No problem,I'll send it in a PM.Mr_Roboto wrote:Could you do me a favor and set it on a flat surface so the bolt holes are flush then measure the distance to the edge of the pulley or take a pic?
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
Were close,Really close.
+ wire for 02 needs to be finalized,
I finished repairing the original tilt column,just have to
install the steering wheel to it & install it in the van,install cluster & bezel,
drop a battery into it,install rad overflow & winshield wiper bottles,fill the rad
& start it up.
-Boto,I still have to take pics/measurements of the braket & PM you.
+ wire for 02 needs to be finalized,
I finished repairing the original tilt column,just have to
install the steering wheel to it & install it in the van,install cluster & bezel,
drop a battery into it,install rad overflow & winshield wiper bottles,fill the rad
& start it up.
-Boto,I still have to take pics/measurements of the braket & PM you.
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
IT'S ALIVE!!!!
She turned over well & runs great,
There is a slight exhaust leak @ the Y pipe,But
nothing we can't handle.
-Next up is finish up interior/exterior cosmetics,Insure it & go.
A special shout out thanks goes out to James (V-8 Famvan)
& Kevin (Kidhauler) for there time spent with Steph & I on this
project.
-Welcome to the V-8 Family Stephanie!
She turned over well & runs great,
There is a slight exhaust leak @ the Y pipe,But
nothing we can't handle.
-Next up is finish up interior/exterior cosmetics,Insure it & go.
A special shout out thanks goes out to James (V-8 Famvan)
& Kevin (Kidhauler) for there time spent with Steph & I on this
project.
-Welcome to the V-8 Family Stephanie!
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
Re: Stephanie's Project V-8 RS
Nice job guys 
and thanks for keeping us informed with text and pics throughout the whole process. 
and thanks for keeping us informed with text and pics throughout the whole process. 1999 LS AWD 3" Lift,4.10's,Snowplow,9500lb Ramsey winch
-
doyoulikeithere
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: Stephanie's Project V-8 RS
Nice Work, How bout an update?
Hey I wonder if you guys can answer this one...
I have a 1987 TBI roller cam block, and I wanna put 98ish Vortec heads on it.
Pretty straightforward I think.
Will the pushrods from the early engine be the correct length to meet the vortec rockers?
or will I need to get the vortec pushrods too. The rockers look identical in shape.
Any insight will help, Thanks IA.
Hey I wonder if you guys can answer this one...
I have a 1987 TBI roller cam block, and I wanna put 98ish Vortec heads on it.
Pretty straightforward I think.
Will the pushrods from the early engine be the correct length to meet the vortec rockers?
or will I need to get the vortec pushrods too. The rockers look identical in shape.
Any insight will help, Thanks IA.
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
reaper
Topic author - I sleep in my van
- Posts: 381
- Joined: Thu Sep 21, 2006 8:51 pm
- Location: VANcouver
Re: Stephanie's Project V-8 RS
Small update,
front end is all back together,
headlight bezels,grille,bumper installed.
Stephanie installed the front/rear carpet & thats about as far
as we got.(cold & snow kicked in).
This weekend we are planning to get the seats in &
finish up some minor dash details.
-I wasnt here but Steph took the van out for a rip last weekend &
her response was "It scared me"
Doyoulikeithere - You can use the 87 pushrods with your vortec heads.
front end is all back together,
headlight bezels,grille,bumper installed.
Stephanie installed the front/rear carpet & thats about as far
as we got.(cold & snow kicked in).
This weekend we are planning to get the seats in &
finish up some minor dash details.
-I wasnt here but Steph took the van out for a rip last weekend &
her response was "It scared me"
Doyoulikeithere - You can use the 87 pushrods with your vortec heads.
90 Astro Cargo V-8
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
90 Artro RS - V-8 Now running!
& a bunch of tractors
"there's nothing like a V-8 Polluting the Environment"
-
doyoulikeithere
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: Stephanie's Project V-8 RS
Most Excellent!reaper wrote:Doyoulikeithere - You can use the 87 pushrods with your vortec heads.
Many Thank You's
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.