Just been reading an odd post or two regarding these, and I was wondering where I can purchase some?
I have vibration! (whoopy doo)
Shep
4 degree shims (where can i get some)?
-
astroshepawd
Topic author - I am smitten with my van
- Posts: 42
- Joined: Wed Feb 06, 2008 4:18 pm
- Location: Isle of Wight , England
4 degree shims (where can i get some)?
'98' AWD 4" lift and very basic (it has to work for a living).
-
TheChopFather
- Retired
- Posts: 193
- Joined: Wed Sep 20, 2006 7:53 pm
- Location: Cleveland,Ohio
Re: 4 degree shims (where can i get some)?
advance auto parts has em
ISN'T HE SO SEXY IN HIS PRETTY WHITE DRESS???LOL
Re: 4 degree shims (where can i get some)?
Shep, forgive my ignorance, but are these shims for the rear axle?
Rob Shaver
1989 Astro 305 with an MSD 6A ignition and a dash-mounted MSD timing control, a 4160 Holley 465 cfm four barrel carb, and an HEI distributor.
Moog 625 front springs and Energy Suspension poly bushings. Rear OEM sway bar. Edelbrock shocks.
1989 Astro 305 with an MSD 6A ignition and a dash-mounted MSD timing control, a 4160 Holley 465 cfm four barrel carb, and an HEI distributor.
Moog 625 front springs and Energy Suspension poly bushings. Rear OEM sway bar. Edelbrock shocks.
-
astroshepawd
Topic author - I am smitten with my van
- Posts: 42
- Joined: Wed Feb 06, 2008 4:18 pm
- Location: Isle of Wight , England
Re: 4 degree shims (where can i get some)?
Hi Rob, yes they are. I have had a vibration at speed ever since the lift kit installation, nothing serious but noticeable. Until now I thought it was perhaps just the tyres until reading some posts on here.
I have always known that u/j's hate obscure angles to run at, not that I would have thought the slight raise of 4" would have made much difference. But it obviously does, so to correct the diff - prop angle makes a lot of sence.
I have mailed Advance Auto (thanks CF) and also spied that Dan at Overland has them..figures really!!!!
So whoever can get them shipped to the UK gets the sale.
Thanks,
Shep
I have always known that u/j's hate obscure angles to run at, not that I would have thought the slight raise of 4" would have made much difference. But it obviously does, so to correct the diff - prop angle makes a lot of sence.
I have mailed Advance Auto (thanks CF) and also spied that Dan at Overland has them..figures really!!!!
So whoever can get them shipped to the UK gets the sale.
Thanks,
Shep
'98' AWD 4" lift and very basic (it has to work for a living).
-
s10-den
- I finally get the smurf thing
- Posts: 114
- Joined: Tue Aug 05, 2008 6:52 am
- Location: Tallahassee,Florida
Re: 4 degree shims (where can i get some)?
Jags That Run(JTR) has them also in different degrees.
94 Astro cargo EXT----Bought specifically to mod!!Will be tbi 350 v8 and new front end conversion
Done so many v8 s10's their old news
Done so many v8 s10's their old news
Re: 4 degree shims (where can i get some)?
Shep, not to steal Darren's thunder and all, but if you need them shipped to you give me a yell.
Rob Shaver
1989 Astro 305 with an MSD 6A ignition and a dash-mounted MSD timing control, a 4160 Holley 465 cfm four barrel carb, and an HEI distributor.
Moog 625 front springs and Energy Suspension poly bushings. Rear OEM sway bar. Edelbrock shocks.
1989 Astro 305 with an MSD 6A ignition and a dash-mounted MSD timing control, a 4160 Holley 465 cfm four barrel carb, and an HEI distributor.
Moog 625 front springs and Energy Suspension poly bushings. Rear OEM sway bar. Edelbrock shocks.