my van is running fantastic at the moment and since its now a keeper i am thinking of fitting duel fuel i found a lpg mixer on ebay has any body usd one like this? http://www.ebay.co.uk/itm/LPG-MIXER-Chevrolet-V6-V8-TBI-NEW-/221668055329?hash=item339c721921:m:mV1qF5zfRcHdsl2kxC7TkbA or can you sugge...

Well 600 mile and still going strong

Hi all right then update time .I changed every sensor on the engine as well as the ecm and fuel regulator and it made zero difference . The only noticeable thing was by changeing the knock sensor and the spark control unit after setting the timing the marks still line up after reconnecting the wire ...

I go to new York on Saturday so I have ordered every sensor on the engine and also a second hand ecm to be delivered to the hotel . So it will save on shipping to the UK . I have also ordered a fuel pump so ecstatic thing will be New my plan is change each part in turn until it works how it should w...

Sorry between 3&5 spark plugs

Engine hot Engine is smooth as a nut No air leaks I have not checked fuel pressure yet ( is their a take of port I can't find one ) Some times it pinks I am thinking the spark control unit .and knock sensor at back of the engine maybe at fault I am not getting any fault codes from the ecu . I get a ...

19° just seams excessive .
I have noticed its better first thing when every thing is very cold

If I set the ignition timing with the bypass wire disconnected to 0° and then reconnect the wire when I recheck the timeing it set to 19° btdc .
Is this correct or is the possible fault

Found it .

Can any one tell me the location of the spark control unit

No compression test .
It ticks over fine you could could put a glass of water on the air cleaner and it would hardly ripple . It's not over heating or using any water or oil .
I think I bought someone's problem that they gave up on

Today's up date Drive to work was very slow and lumpy under load Still no codes Changed the temp sendercthe one next to the thermostat ( no change) Put it on a 4 gas analyser and noticed the lambda reading was high . Disconnected the lambda no change on the readings . Managed to cross reference the ...

I only get code 12
I am going to drive it to work and check it again

That's very useful thanks I will have a play tomorrow

0° on the timing
I am struggling getting the codes but i have a guy coming tommoz with some kit that may read it