Quick dis connect sway bar link ideas

FROM FIBERGLASS MONOLEAFS TO AIR BAGS, STOCK HEIGHT TO BODY SLAMMED, EVERYTHING EXCEPT LIFTS GO HERE.

Topic author
Astrophysics
I sleep in my van
Posts: 931
Joined: Sat Jan 12, 2008 9:23 pm
Been thanked: 4 times

Re: Quick dis connect sway bar link ideas

Post by Astrophysics »

Hi,

Finally assembled prototype quick disconnect front sway bar link .

The front sway bar is about 1 1/8" diameter, 29.28 mm.
The OEM link has rubber bushings at each end to isolate vibration.

The alloy Ford Ranger 4x4 eye to eye link has pressed in rubber in the eye.

So I figure I go go metal to metal with the Uni strut P1973 clevis bolted right to the lower control arm and to top bolted right to sway bar end eye.

To disconnect the sway bar for more articulation off road, un screw and remove the M12 x 70 mm 1.75 mm pitch bolts and remove the Ford alloy link. Then need to safety wire the sway bar to the upper shock bracket or?


AP

Next weekend I will try to actually test fit on vehicle.

Topic author
Astrophysics
I sleep in my van
Posts: 931
Joined: Sat Jan 12, 2008 9:23 pm
Been thanked: 4 times

Re: Quick dis connect sway bar link ideas

Post by Astrophysics »

Hi
Attachments
Link is removable
Link is removable
Post Reply