1995 G30 Windshield gasket

[BIGFOOT17]

The 95 G30 I bought has rust in the lower corner by the windshield. I plan on having the windshield removed so I can fix that spot. And I'm sure I'll find more.
Is the windshield a glue in or the rope pull style?
I've read lots of horror stories on incorrect installation and leaking.

[WoodButcher]

Pretty sure they were all glued in by then, looking at the '93 g van FSM it is.

[KitKat]

Hi...I own a 1995 chevy g30 van and the windshield gasket is NOT glued in ...it is a three piece rubber gasket and is thick and it goes on with pressure and it gets locked by a small piec of rubber trim you get when you buy the gasket...if you manage to find a one piece rubber gasket then you just have to press it in by hand ...

[augidog]

I don't have any experience with this, and am only posting info I found that may or may not be helpful.

https://www.gmpartsdirect.com/v-1995-ch ... windshield

https://www.steelerubber.com/search?yea ... senger-van

As usual with older vehicles, the info sometimes is contradictory or vague.

[WoodButcher]

I'll say,
From the steele rubber link

Installation Note
Note: Windshields are a urethane glue-in for these vehicles. This part is a molding set that is installed after the glass is back in place in the vehicle.
Using a heat gun can be helpful when forming the molding around corners.

[BIGFOOT17]

Thanks. I have a guy coming out to remove the windshield.