THIS WEEKEND. Things to do when lifting.
-
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: THIS WEEKEND. Things to do when lifting.
its been 15 yrs or so for me, but if you can get in, and up to the top, you can stand on the top of the bluffs or whatever, looking way way down onto Alouette Lake from the other side.
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3117
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: THIS WEEKEND. Things to do when lifting.
According to others, cranking up the torsion bars stresses the idler arms, so I'm thinking of a way to solve that.
Putting a spacer where they mount up won't work due to control arm interference. I'm not sure if it's possible with this type of steel, but I wonder if you could heat up the curved part and pound it straight. Another idea is to replace the curved part with one from another vehicle that is straight or curved the other way: (GM light trucks, vans & SUV's look like good candidates).
Putting a spacer where they mount up won't work due to control arm interference. I'm not sure if it's possible with this type of steel, but I wonder if you could heat up the curved part and pound it straight. Another idea is to replace the curved part with one from another vehicle that is straight or curved the other way: (GM light trucks, vans & SUV's look like good candidates).
-
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: THIS WEEKEND. Things to do when lifting.
the BEST fix is a solid front axle conversion.
Notice I didnt say cheapest or easiest fix.
Notice I didnt say cheapest or easiest fix.
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3117
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: THIS WEEKEND. Things to do when lifting.
That's precisely why a SAS is out of the question for me.
-
- ASV Supporter
- Posts: 674
- Joined: Tue Aug 04, 2009 10:45 am
- Location: San Diego, CA
- Has thanked: 12 times
- Been thanked: 4 times
- Contact:
Re: THIS WEEKEND. Things to do when lifting.
Those look like cast iron, which isn't really malleable, so you won't be pounding it straight. However the design looks fairly simple, it would probably be simple enough to fab up some straight ones, at least... I need to take a look at mine when I do my lift soon. I know the perfect guy who already has a business selling speed parts who would be happy to add a new product if we can figure out how to make an idler arm for lifted vans that isn't super complicated.timelessbeing wrote:According to others, cranking up the torsion bars stresses the idler arms, so I'm thinking of a way to solve that.
Putting a spacer where they mount up won't work due to control arm interference. I'm not sure if it's possible with this type of steel, but I wonder if you could heat up the curved part and pound it straight. Another idea is to replace the curved part with one from another vehicle that is straight or curved the other way: (GM light trucks, vans & SUV's look like good candidates).
Anyone know if there's any reason you couldn't make these out of tubular or solid bar steel? (i.e. do they NEED to be cast iron?)
"My minivan is cooler than your bro-truck"
2003 Astro AWD Astrolander/ZMB - GTRV Top Transplant, 4" OLV Lift, NP233 T-case, evolving interior
1995 Safari GTRV Organ donor - gutted and gone.
2003 Astro AWD Astrolander/ZMB - GTRV Top Transplant, 4" OLV Lift, NP233 T-case, evolving interior
1995 Safari GTRV Organ donor - gutted and gone.
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3117
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: THIS WEEKEND. Things to do when lifting.
That would be fantastic, Herbie. I was hoping someone more connected than I would be interested. Consider me a customer!
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3117
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: THIS WEEKEND. Things to do when lifting.
I decided to check up on the height all around, and here are my measurements.
(wheel center to fender lip / ground to fender lip)
Front
left: 18.75/32"
right: 19/32.75"
Rear
left: 21.5/35"
right: 22.5/36"
This is with 30" tires (which actually squish down to 28" on the van). Torsion bars are tightened all the way, with one let out slightly for levelling during my last wheel alignment.
Looks like there's significant lean to the left. Any ideas why? How much does the fuel tank weigh dry? It was completely empty when I measured, but maybe the springs fatigue from it being there. The front axle and shaft are offset to the left a bit, but the engine is offset to the right. Not sure if that balances out.
(wheel center to fender lip / ground to fender lip)
Front
left: 18.75/32"
right: 19/32.75"
Rear
left: 21.5/35"
right: 22.5/36"
This is with 30" tires (which actually squish down to 28" on the van). Torsion bars are tightened all the way, with one let out slightly for levelling during my last wheel alignment.
Looks like there's significant lean to the left. Any ideas why? How much does the fuel tank weigh dry? It was completely empty when I measured, but maybe the springs fatigue from it being there. The front axle and shaft are offset to the left a bit, but the engine is offset to the right. Not sure if that balances out.
-
- ASV Supporter
- Posts: 2667
- Joined: Sat Dec 02, 2006 12:34 pm
- Location: Orlando, FL
Re: THIS WEEKEND. Things to do when lifting.
These arms are forged steel. They will take all the heat you can put on them. The problem is the heat will probably destroy the socket. Using a press would be a better option.
1996 Safari SLX Hotair balloon transport vehicle