Rubber Gromets on Air Cleaner Assembly
-
KitsapSteve
Topic author - I am merely driving my van
- Posts: 1
- Joined: Wed Nov 13, 2013 2:36 pm
Rubber Gromets on Air Cleaner Assembly
I was doing to looking at removing and cleaning my MAF sensor, on my 2002 Astro , and I noticed that there are 2 rubber grommets that hold this assembly in position, and one is pretty toasted,,,cracked and splitting...and Idea where I can locate a new set...
Re: Rubber Gromets on Air Cleaner Assembly
A bone yard that lets you pick your own parts would be my plan.
'04 White AWD Astro cargo
'00 Astro / El Camino
'61 BSA Super Rocket
'71 BSA B50 engine in a '67 C25 250 chassis
Impossible is just a degree of difficulty....
'00 Astro / El Camino
'61 BSA Super Rocket
'71 BSA B50 engine in a '67 C25 250 chassis
Impossible is just a degree of difficulty....
-
Astrophysics
- I sleep in my van
- Posts: 974
- Joined: Sat Jan 12, 2008 9:23 pm
- Been thanked: 9 times
Re: Rubber Gromets on Air Cleaner Assembly
Or you could get large grommets on line from McMaster Carr.
Or even call Chevy dealer or www.gmpartsdepartment.com on line
Or what i did with 2 inch lift kit which caused the air cleaner snorkel to have a gap to the grommet, i used about 3/8 diameter vinyl hose to extend the reach of the grommet to plastic tap engagement.
AP
Or even call Chevy dealer or www.gmpartsdepartment.com on line
Or what i did with 2 inch lift kit which caused the air cleaner snorkel to have a gap to the grommet, i used about 3/8 diameter vinyl hose to extend the reach of the grommet to plastic tap engagement.
AP