Inner CV joint boots slinging grease.
-
Stroverlander
- I sleep in my van
- Posts: 308
- Joined: Fri Dec 16, 2011 4:18 pm
Re: Inner CV joint boots slinging grease.
On S10 diff drops, the top mount is cut off the differential and a longer mount bolts onto the side plate cover on the driver's side of the diff. For the passenger side mount, an angled spacer is used.
2004 Astro LT AWD Stroverlander
-
Astrophysics
- I sleep in my van
- Posts: 974
- Joined: Sat Jan 12, 2008 9:23 pm
Re: Inner CV joint boots slinging grease.
Good work!
Please take lots of photos. If possible place a 6" pr 12" set of rulers next to brackets to give approximate dimensions.
Thank you,
AP
Please take lots of photos. If possible place a 6" pr 12" set of rulers next to brackets to give approximate dimensions.
Thank you,
AP
-
photo_van
- I sleep in my van
- Posts: 592
- Joined: Wed May 18, 2011 4:38 pm
- Location: 7000' in the Mountains of California
Re: Inner CV joint boots slinging grease.
so did you do this?
1998 AWD/4WD
4" lift, 31x10.50's, NP 242j/c hybrid, 4.10 gears, S10 front disconnect, rack & pinion steering, trans cooler, rock sliders, ARB fridge, house battery and 100w solar, swing out rear rack with foldout camp table, bed and passenger swivel chair
dirt bag camping rig
1981 Toyota 4x4 pu
1974 John Deere 710
4" lift, 31x10.50's, NP 242j/c hybrid, 4.10 gears, S10 front disconnect, rack & pinion steering, trans cooler, rock sliders, ARB fridge, house battery and 100w solar, swing out rear rack with foldout camp table, bed and passenger swivel chair
dirt bag camping rig
1981 Toyota 4x4 pu
1974 John Deere 710