Page 2 of 2
Re: Unflip a flip kit!
Posted: Mon Sep 22, 2008 2:20 pm
by andyfanshawe
Hi Mr Singh.
Just came across this post. I live in the UK also (Derbyshire - J29 of M1). In about 4 weeks I am going to fit a flip kit (and dropped spindles) to one of my mates Astro 2WD van. So, I would have thought there should be stock parts available.
I can contact him if you are interested to see what he says.
Andy.
Re: Unflip a flip kit!
Posted: Sat Sep 27, 2008 11:03 am
by Mr Singh
Hi Andy!
Yes please! if you could hold onto the stock pieces that would be great!
If he hasn't already he can buy my flip kit and do a swap?
Cheers!
Am
Re: Unflip a flip kit!
Posted: Sat Sep 27, 2008 1:23 pm
by Merlin
I could be wrong but in the third picture of your vans springs, the one showing the rear of the left side, it looks like the spring is bent right at the shackle. I took a look at my van and the spring isn't at the angle yours looks like it is. This would make the van set lower. Does anyone else think the same? It could just be the angle you took the picture at too.
Re: Unflip a flip kit!
Posted: Tue Sep 30, 2008 3:26 pm
by andyfanshawe
Mr Singh wrote:Hi Andy!
Yes please! if you could hold onto the stock pieces that would be great!
If he hasn't already he can buy my flip kit and do a swap?
Cheers!
Am
I'll let you know asap.
Andy.
Re: Unflip a flip kit!
Posted: Tue Sep 30, 2008 5:01 pm
by Mr Singh
Clive has PM'd me on Astrovans UK forum.
Thanks
Re: Unflip a flip kit!
Posted: Tue Dec 16, 2008 8:52 am
by Mr Singh
Mission accomplished thanks to Joe
Thats with around 1000lbs loaded in. Another 2000lbs or so to go in. Will use the Airlift bags to give it some support when it comes down.
Re: Unflip a flip kit!
Posted: Tue Dec 16, 2008 11:16 am
by violent b
Hi Am,
so the rear end of your van is stock with 1,000 pounds in it? It doesn't look like it has went down very much. I might have to do this also, I have a huge stereo system going in and I have a flip kit right now. Looks like I'll be changing back to the stock.
keep the updates coming.
Bill
Re: Unflip a flip kit!
Posted: Tue Dec 16, 2008 1:40 pm
by Mr Singh
Hi Bill
The before pic was with the flip kit install + 1000lbs it was pretty close to being bottomed out and looking like needing a c-notch.
Put the rear back to stock ride height and hey presto I have lots more clearance. It all looks a little exagerated since the front is very low, not going to lift the front.. Want to retain a good stance once all is said and done. The Billet rims are at the polishers being re-done with some Extra Load tyres with a slightly wider and bigger profile, not too much but a decent compromise on things.
Re: Unflip a flip kit!
Posted: Tue Dec 16, 2008 9:27 pm
by SoCalli V8
Wow, Blue skies in England.... thats a rare sight.
Oh and your van looks great now also.... Mr Singh.
Re: Unflip a flip kit!
Posted: Wed Dec 17, 2008 2:25 am
by Mr Singh
Thanks mate, yes thats September Vs. December!
We had one hell of a great summer........NOT! #-o
Re: Unflip a flip kit!
Posted: Thu Dec 18, 2008 8:27 pm
by blk lt awd
i gotta say i love the color combo on your van. got any pics of the system set up so far?
Re: Unflip a flip kit!
Posted: Sat Dec 20, 2008 1:52 am
by Mr Singh
I'll make a build thread blog on here soon.