Transfer case swap to a 2 speed - electric shift
-
- I sleep in my van
- Posts: 974
- Joined: Sat Jan 12, 2008 9:23 pm
Re: Transfer case swap to a 2 speed - electric shift
I used some mild degreaser and a nylon scrub brush.
-
- I sleep in my van
- Posts: 974
- Joined: Sat Jan 12, 2008 9:23 pm
Re: Transfer case swap to a 2 speed - electric shift
I will try to re install th nice Astro OEM forward brace strut which was used on the NP136 t-case. It looks like a good brace too have.
AP.
See photo of brace on NP136, may need to modify bracket or flange since np233c t -case seems to have some extra threaded holes on upper side.
AP.
See photo of brace on NP136, may need to modify bracket or flange since np233c t -case seems to have some extra threaded holes on upper side.
-
- I sleep in my van
- Posts: 592
- Joined: Wed May 18, 2011 4:38 pm
- Location: 7000' in the Mountains of California
Re: Transfer case swap to a 2 speed - electric shift
2wd low can be nice if you do a lot of slickrock crawling, but you have to use it with caution. My DIY posiloc is still working great. I don't think I notice any difference in steering between 2wd and awd.
1998 AWD/4WD
4" lift, 31x10.50's, NP 242j/c hybrid, 4.10 gears, S10 front disconnect, rack & pinion steering, trans cooler, rock sliders, ARB fridge, house battery and 100w solar, swing out rear rack with foldout camp table, bed and passenger swivel chair
dirt bag camping rig
1981 Toyota 4x4 pu
1974 John Deere 710
4" lift, 31x10.50's, NP 242j/c hybrid, 4.10 gears, S10 front disconnect, rack & pinion steering, trans cooler, rock sliders, ARB fridge, house battery and 100w solar, swing out rear rack with foldout camp table, bed and passenger swivel chair
dirt bag camping rig
1981 Toyota 4x4 pu
1974 John Deere 710