Re: 96' 383 build
Posted: Sun Sep 07, 2008 6:56 pm
i hate you moreDanny
i hate you moreDanny
Page 4 of 11
i hate you moreDanny
Re: 96' 383 build
Posted: Wed Sep 10, 2008 4:33 am
those pics make it hard to tell, did you paint that black to match the rest of the van, or is it your honda green like the engine?
Re: 96' 383 build
Posted: Wed Sep 10, 2008 6:13 pm
GnarliSafari-the engine bay matches the motor. the rest of the van is still the black.
Vance-i got your stuff painted tonight thought i would share pics with you and everyone else.
Danny
Vance-i got your stuff painted tonight thought i would share pics with you and everyone else.
Danny
Re: 96' 383 build
Posted: Thu Sep 11, 2008 3:11 am
You've just made Lockdoc a very happy man Danny,lol
Re: 96' 383 build
Posted: Thu Sep 11, 2008 3:58 am
lol whys that zam? is that one of his pet peeves?
Danny
Danny
Re: 96' 383 build
Posted: Thu Sep 11, 2008 5:18 am
Yea, Bill's a paint freak,lolnitropyro wrote:lol whys that zam? is that one of his pet peeves?
Danny
Re: 96' 383 build
Posted: Thu Sep 11, 2008 4:04 pm
there you go lockdoc that was just for you!!!!! lol
Danny
ps i wish vance would look at his own thread he still hasnt seen these yet
Danny
ps i wish vance would look at his own thread he still hasnt seen these yet
Re: 96' 383 build
Posted: Thu Sep 11, 2008 9:18 pm
Ok, sorrry! I just got home from work and it is now midnight. I only went in at 7:30 this morning and I got off at 10:30 last night. hehe, 15.5 hours for one day is awsome. :-k
anyways, thanks mr. por-15 man, looks good. You no pull off a/c clutch, whats up?
-Vance
anyways, thanks mr. por-15 man, looks good. You no pull off a/c clutch, whats up?
-Vance
Re: 96' 383 build
Posted: Thu Sep 11, 2008 9:58 pm
Soooooooo,Zam,your saying I could drive to Bill's with a box of parts and he would.....oh never mind.astrozam wrote:Yea, Bill's a paint freak,lolnitropyro wrote:lol whys that zam? is that one of his pet peeves?
Danny
Re: 96' 383 build
Posted: Fri Sep 12, 2008 3:59 am
ac clutch is alreay fixed!!!!! ha was done tuesday night! you know im glad i just read this i will even bring these to your house tonight now. lol
Danny
Danny
Re: 96' 383 build
Posted: Sun Sep 14, 2008 4:45 pm
Update:
Saturday night me and danny accomplished a lot. We got the motor mounts to fit properly and we used the stock tranny for now so the motor was siting on the frame correctly. We got the two on the sub frame and we slid the craddle under the van. Lowered the shell on the new body cushins and bolted the two togeather. Also got some of the accessories on. Here ya go.
-Vance
Saturday night me and danny accomplished a lot. We got the motor mounts to fit properly and we used the stock tranny for now so the motor was siting on the frame correctly. We got the two on the sub frame and we slid the craddle under the van. Lowered the shell on the new body cushins and bolted the two togeather. Also got some of the accessories on. Here ya go.
-Vance
Re: 96' 383 build
Posted: Sun Sep 14, 2008 4:49 pm
here is a tip for you all.
I had to take the plugs out so the motor would turn over a bit easier. The back four plugs are hard to get out due to the headers are so tight. Here is what I did. Took a 1/2 drive short 5/8 socket and ground down two flat spots on the back of the socket so I could fit a 3/4 wrench on it . The 1/2 drive socket allows you to fit it over the whole plug and then you just brake lose the plug with the wrench. Thought I would share. Free tip for those who are watching.
-Vance
I had to take the plugs out so the motor would turn over a bit easier. The back four plugs are hard to get out due to the headers are so tight. Here is what I did. Took a 1/2 drive short 5/8 socket and ground down two flat spots on the back of the socket so I could fit a 3/4 wrench on it . The 1/2 drive socket allows you to fit it over the whole plug and then you just brake lose the plug with the wrench. Thought I would share. Free tip for those who are watching.
-Vance
Re: 96' 383 build
Posted: Sun Sep 14, 2008 5:37 pm
It sure would be nice to see this van and Danny's van in PA next year. Looking good guys.
Re: 96' 383 build
Posted: Sun Sep 14, 2008 8:20 pm
Im sure we will be out and about.
-Vance
-Vance
Re: 96' 383 build
Posted: Mon Sep 15, 2008 10:45 pm
Looking good! Are you going to paint the subframe later?