Inner CV joint boots slinging grease.

THIS FORUM IS FOR ANY QUESTIONS ON THE 7.25" IFS FRONT DIFF, CV HALF SHAFTS AND FRONT DRIVE SHAFT.
User avatar

Stroverlander
I sleep in my van
Posts: 308
Joined: Fri Dec 16, 2011 4:18 pm

Re: Inner CV joint boots slinging grease.

Post by Stroverlander »

On S10 diff drops, the top mount is cut off the differential and a longer mount bolts onto the side plate cover on the driver's side of the diff. For the passenger side mount, an angled spacer is used.

Image

Image
2004 Astro LT AWD Stroverlander

Astrophysics
I sleep in my van
Posts: 969
Joined: Sat Jan 12, 2008 9:23 pm
Been thanked: 8 times

Re: Inner CV joint boots slinging grease.

Post by Astrophysics »

Good work!
Please take lots of photos. If possible place a 6" pr 12" set of rulers next to brackets to give approximate dimensions.

Thank you,

AP

photo_van
I sleep in my van
Posts: 592
Joined: Wed May 18, 2011 4:38 pm
Location: 7000' in the Mountains of California
Been thanked: 3 times

Re: Inner CV joint boots slinging grease.

Post by photo_van »

so did you do this?
1998 AWD/4WD
4" lift, 31x10.50's, NP 242j/c hybrid, 4.10 gears, S10 front disconnect, rack & pinion steering, trans cooler, rock sliders, ARB fridge, house battery and 100w solar, swing out rear rack with foldout camp table, bed and passenger swivel chair
dirt bag camping rig
1981 Toyota 4x4 pu
1974 John Deere 710
Post Reply