Quick dis connect sway bar link ideas

[Astrophysics]

Hi,

Finally assembled prototype quick disconnect front sway bar link .

The front sway bar is about 1 1/8" diameter, 29.28 mm.
The OEM link has rubber bushings at each end to isolate vibration.

The alloy Ford Ranger 4x4 eye to eye link has pressed in rubber in the eye.

So I figure I go go metal to metal with the Uni strut P1973 clevis bolted right to the lower control arm and to top bolted right to sway bar end eye.

To disconnect the sway bar for more articulation off road, un screw and remove the M12 x 70 mm 1.75 mm pitch bolts and remove the Ford alloy link. Then need to safety wire the sway bar to the upper shock bracket or?


AP

Next weekend I will try to actually test fit on vehicle.

[Astrophysics]

Hi

[Astrophysics]

Hello,
Astro sway bar dis connect update.

Warrior Products of Iregon, sells the post to post quick disconnect kit for $175

PN 83111

6 inch from flat to flat.

Has 3 1/2 ‘ long tubing and the post ends have the rubber or urethane bushings.

The tube is strong with 0.120 inch wall thickness.

The quick release pins are 1/4"

AP

I plan to order a set for my 2003 AsTro 4x4

[Astrophysics]

Warrior products sway bar dis connect set PN 83111

I will post a photo soon

[Astrophysics]

Sway bar dis connect

[MountainManJoe]

slick