Page 1 of 1
2001 4.3 torque spec
Posted: Tue Feb 12, 2008 3:53 pm
by Rebel
Got to change out the intake gasket on my Jimmy,,anyone have the intake torque specs. on a 2001 4.3.
Re: 2001 4.3 torque spec
Posted: Tue Feb 12, 2008 7:44 pm
by Astro4x4
For lower:
1st pass = 27 in/lb in sequence
2nd pass = 106 in/lb in sequence
final pass = 11 ft/lb in sequence
If ya need more or diagrams, post up. I'll check back in A.M., I'm just tired as 'ell right now and need some shut eye. I happened upon some nice GM software with manuals and service bulletins for most all the newer 95+ GM stuff.
Re: 2001 4.3 torque spec
Posted: Wed Feb 13, 2008 4:47 am
by Smiliesafari
Are those specs for the upper plenum?
Re: 2001 4.3 torque spec
Posted: Thu Feb 14, 2008 8:09 am
by Astro4x4
# Tighten the upper intake manifold attaching studs on the first pass to 5 N·m (44 lb in).
# Tighten the upper intake manifold attaching studs on the final pass to 9 N·m (80 lb in)
I'm trying to get the pages saved complete with pics to post, but the darn pics are linked to my PC and I haven't yet been able to get them to save with the info in document form.
Re: 2001 4.3 torque spec
Posted: Thu Feb 14, 2008 8:23 am
by Rebel
Hey,,really appreciate the info guys. Thanks a lot. Now,, just to get the job done. I don't like working on late model stuff at all but got to be done. Haven't had any AF mix yet but have been pushing my luck.
Thanks again.