flip kit question
-
Topic author - I finally get the smurf thing
- Posts: 128
- Joined: Sat Jul 07, 2007 11:48 am
- Location: lenox,MA
- Contact:
flip kit question
ok so i have a monoleaf rear end on my steel leaf van....which flip kit do i use? right now im using the steel clam shells
--->2000 RWD 4.3L/4L60E ,3.43 gears.exhaust and throttle body mods....gone =(...
-->1998 kia sportage 3 inch lift 30 inch tires under repairs
-
Topic author - I finally get the smurf thing
- Posts: 128
- Joined: Sat Jul 07, 2007 11:48 am
- Location: lenox,MA
- Contact:
Re: flip kit question
no one has a clue?...this is alittle expensive to find out for myself
--->2000 RWD 4.3L/4L60E ,3.43 gears.exhaust and throttle body mods....gone =(...
-->1998 kia sportage 3 inch lift 30 inch tires under repairs
-
- I finally get the smurf thing
- Posts: 153
- Joined: Sat Aug 16, 2008 3:16 pm
Re: flip kit question
Please forgive my question, by mono leaf are you talking about the fibre glass ones? if so my one has what i beleive to be a beltech flip kit i can post photos if ness...Johnny
Re: flip kit question
yes Belltech makes the rear flip kit for the mono fiber leaf springs , not sure of the cost though , its been awhile sence i looked . Larry (rebel) had one for sale for 130$ if i remember correctly .
-
- I sleep in my van
- Posts: 704
- Joined: Tue Sep 19, 2006 4:50 am
- Location: Plymouth Township, PA
Re: flip kit question
If you still have steel leafs then get one for the steel leafs. The clam shell part is basically the same between the two. The front and rear hangers are what is different. I personally like the DJM kit.k120189 wrote:ok so i have a monoleaf rear end on my steel leaf van....which flip kit do i use? right now im using the steel clam shells
http://www.djmsuspension.com/Products/P ... oParts.htm
Current:
01 AWD - Stock
98 AWD - Stock
Past:
93 4WD - 305 V8 - 5" lift - 31" tires
98 4WD DHC - 10" lift - 33" tires - Onboard air and Hydraulics - Snowplow
92 RWD - 350 V8 - lowered - 97 front clip
92 RWD - 350 V8 - converted to AWD - V6
91 AWD - 350 V8 - conversion van
94 RWD - 350 V8 - sons van
92 RWD - stock - sons van
93 RWD Shorty - project
89 RWD Shorty - parts van
01 AWD - Stock
98 AWD - Stock
Past:
93 4WD - 305 V8 - 5" lift - 31" tires
98 4WD DHC - 10" lift - 33" tires - Onboard air and Hydraulics - Snowplow
92 RWD - 350 V8 - lowered - 97 front clip
92 RWD - 350 V8 - converted to AWD - V6
91 AWD - 350 V8 - conversion van
94 RWD - 350 V8 - sons van
92 RWD - stock - sons van
93 RWD Shorty - project
89 RWD Shorty - parts van
-
Topic author - I finally get the smurf thing
- Posts: 128
- Joined: Sat Jul 07, 2007 11:48 am
- Location: lenox,MA
- Contact:
Re: flip kit question
my van has steel leafs but a mono leaf axle...so go with the kit for the steel leafs?
ok then in a few weeks it shall be ordered..just found out my filler plates will be here friday... =D no more handles locks or plate box for me
ok then in a few weeks it shall be ordered..just found out my filler plates will be here friday... =D no more handles locks or plate box for me
--->2000 RWD 4.3L/4L60E ,3.43 gears.exhaust and throttle body mods....gone =(...
-->1998 kia sportage 3 inch lift 30 inch tires under repairs
Re: flip kit question
sweetness!
Danny
Danny
Danny im 21 year old with an 89 astro bbc 9in bagged 20's & 18's