Page 1 of 1
97 Astro problem
Posted: Fri Oct 31, 2008 6:01 am
by astrogus
This is really starting to aggravate me. When i stop hard, Like when a light turns yellow and i gotta get slowed down quick. My van shakes something fierce, Then when i put it in neutral it goes away. But while it shakes and i go to take off it feels like there just nothing there take off wise. I've started to notice too while i shakes the mph gauge and etc flicker. Also when i come to a stop it feels like it just wants to take off sometimes. Im thinking it something to do with the trans but not sure. Any imput would be awesome i wanna get this taking care of asap. Thanks
Re: 97 Astro problem
Posted: Fri Oct 31, 2008 6:06 am
by astro355
Almost sounds like your torque convertor lockup is not disengaging. But if that was the case, the engine would stall too once you stopped or when you started moving again.
Re: 97 Astro problem
Posted: Fri Oct 31, 2008 6:14 am
by astrogus
Thats what i've heard, About it stalling. Is it possible that it's just starting to go bad and hasnt reached the stalling stages yet? I dont know for the life of me what it is. Thanks for the reply its appreciated, Anymore ideas?
Re: 97 Astro problem
Posted: Fri Oct 31, 2008 8:33 am
by astro355
Well, when the lockup is engaged it creates a physical link between the crankshaft and the driveshaft. It wouldn't kind of do it, its either on or off. It would be just like braking a car with a manual transmission and not pushing the clutch pedal in. It would jerk alot and stall. The computer does control the lockup and who knows, it could be the computer. But I'm not going to say it is without seeing your van. Does it throw any codes right now, regardless of what the codes are?