Differential cover
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3115
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Differential cover
I'm considering buying an aftermarket diff cover. Every time I drag the rear over a rock or something, it starts to leak. Also, with all the rust that has flaked off, there probably isn't much metal left in the stock stamped steel. Reversing into something pointy could prove disastrous. Can anyone recommend a good product that won't break the bank? I've looked but as I found out with my oil pan, manufacturers only seem to make beefy GM parts for V8's and axles >8.5".
-
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: Differential cover
ask http://nsor.com/
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
- I have my van tatooed on my cheeks
- Posts: 4379
- Joined: Sat Sep 09, 2006 3:35 pm
- Location: New Haven, NY
Re: Differential cover
Not a bad idea! Covers are hard to find!
Here is one: PML 9401.
Another: Proform 66667
Another option is to build a guard like I did. It ended up on Blazer's Astro. You can see it in the following pic.
Here is one: PML 9401.
Another: Proform 66667
Another option is to build a guard like I did. It ended up on Blazer's Astro. You can see it in the following pic.
Current rides:
2013 Toyota Tundra DC 4x4
2008 Dodge Nitro 4x4
2005 Nissan Sentra 1.8S Special Edition
Mileage spreadsheet
Vans owned:
1986 Safari 2.5L 4 speed manual - scrapped
1995 Astro 2WD conversion 4.11 posi, shift kit, DHC rock rails - sold to Skippy
1998 Astro 4x4 D44, D60, NP231, full hydraulic system with 9k# Milemarker winch and snow plow - sold to Lockdoc
2003 Astro AWD all stock - traded for a 3/4 ton truck
2005 AWD, 4.10's - sold to skippy
2013 Toyota Tundra DC 4x4
2008 Dodge Nitro 4x4
2005 Nissan Sentra 1.8S Special Edition
Mileage spreadsheet
Vans owned:
1986 Safari 2.5L 4 speed manual - scrapped
1995 Astro 2WD conversion 4.11 posi, shift kit, DHC rock rails - sold to Skippy
1998 Astro 4x4 D44, D60, NP231, full hydraulic system with 9k# Milemarker winch and snow plow - sold to Lockdoc
2003 Astro AWD all stock - traded for a 3/4 ton truck
2005 AWD, 4.10's - sold to skippy
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3115
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: Differential cover
@doyoulikeithere
Unfortunately, they don't have anything.
@LiftedAWDAstro
The PML isn't bad, but it's made of 3/16" aluminum. Same as my oil pan and you know what happened to that.
For $165 + cross border shipping I'm not sold on it.
The proform one is just ridiculous looking. I don't want a huge company logo across my axle.
How much do you want for yours?
Unfortunately, they don't have anything.
@LiftedAWDAstro
The PML isn't bad, but it's made of 3/16" aluminum. Same as my oil pan and you know what happened to that.
For $165 + cross border shipping I'm not sold on it.
The proform one is just ridiculous looking. I don't want a huge company logo across my axle.
How much do you want for yours?
-
- I have my van tatooed on my cheeks
- Posts: 4379
- Joined: Sat Sep 09, 2006 3:35 pm
- Location: New Haven, NY
Re: Differential cover
I sold it to BLAZER when I went to a Dana 60 axle. Let me see if I still have a template around.
Current rides:
2013 Toyota Tundra DC 4x4
2008 Dodge Nitro 4x4
2005 Nissan Sentra 1.8S Special Edition
Mileage spreadsheet
Vans owned:
1986 Safari 2.5L 4 speed manual - scrapped
1995 Astro 2WD conversion 4.11 posi, shift kit, DHC rock rails - sold to Skippy
1998 Astro 4x4 D44, D60, NP231, full hydraulic system with 9k# Milemarker winch and snow plow - sold to Lockdoc
2003 Astro AWD all stock - traded for a 3/4 ton truck
2005 AWD, 4.10's - sold to skippy
2013 Toyota Tundra DC 4x4
2008 Dodge Nitro 4x4
2005 Nissan Sentra 1.8S Special Edition
Mileage spreadsheet
Vans owned:
1986 Safari 2.5L 4 speed manual - scrapped
1995 Astro 2WD conversion 4.11 posi, shift kit, DHC rock rails - sold to Skippy
1998 Astro 4x4 D44, D60, NP231, full hydraulic system with 9k# Milemarker winch and snow plow - sold to Lockdoc
2003 Astro AWD all stock - traded for a 3/4 ton truck
2005 AWD, 4.10's - sold to skippy
Re: Differential cover
TB-I think for you to build something to protect you stuff isn't that hard.
1979 Malibu drag race only car
1999 Sonoma 4.3 5 speed-Rufus
1989 Astro-Ole Yellar cancelled-still selling off parts
1985 Astro-shop van R.I.P. my friend
1994 Astro LT RWD W4.3 rod knock RIP
1982 Winnebago single rear wheel-Chevy 350 Scraped 1/28/13-broken dreams......
Rochester,NY
1999 Sonoma 4.3 5 speed-Rufus
1989 Astro-Ole Yellar cancelled-still selling off parts
1985 Astro-shop van R.I.P. my friend
1994 Astro LT RWD W4.3 rod knock RIP
1982 Winnebago single rear wheel-Chevy 350 Scraped 1/28/13-broken dreams......
Rochester,NY
-
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: Differential cover
I agree with Gary.
Get some 1/4 inch plate and weld some beef onto your stock cover, or on a new stock cover.
Looks like thats what Lifted did.
Get some 1/4 inch plate and weld some beef onto your stock cover, or on a new stock cover.
Looks like thats what Lifted did.
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3115
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: Differential cover
I would love to make my own cover, guys (among other things), but that requires two things: fab tools and a garage. Neither of which is happening right now. Some day though.
Re: Differential cover
TB-I do agree with you about a garage,but then again I surely have seen guys work outside.In fact Dean still doesn't have indoor garage space.Lockdoc works out of a outdoor carport with sides that do not go to the ground.But then again,working outdoors isn't my cup of tea either.
You know it could be as simple as going to a scrap steel place having them cut to a size you need and then pay a weld shop to weld attaching tabs to bolt to drilled holes to the sub frame.
Or you stay out of situations that you know put your parts at risk.
You know it could be as simple as going to a scrap steel place having them cut to a size you need and then pay a weld shop to weld attaching tabs to bolt to drilled holes to the sub frame.
Or you stay out of situations that you know put your parts at risk.
1979 Malibu drag race only car
1999 Sonoma 4.3 5 speed-Rufus
1989 Astro-Ole Yellar cancelled-still selling off parts
1985 Astro-shop van R.I.P. my friend
1994 Astro LT RWD W4.3 rod knock RIP
1982 Winnebago single rear wheel-Chevy 350 Scraped 1/28/13-broken dreams......
Rochester,NY
1999 Sonoma 4.3 5 speed-Rufus
1989 Astro-Ole Yellar cancelled-still selling off parts
1985 Astro-shop van R.I.P. my friend
1994 Astro LT RWD W4.3 rod knock RIP
1982 Winnebago single rear wheel-Chevy 350 Scraped 1/28/13-broken dreams......
Rochester,NY
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3115
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: Differential cover
Believe me, Gary. All these possibilities are in the back of my mind.
The skidplate will have to wait until I sweet talk a friend. Until then I have to behave myself.
Right now the diff is my priority because it's making a mess. I'm tired of reworking it to make it seal, only to have it leak again by just looking at it the wrong way. It's cold out and I don't wanna work on the van very much. I was hoping I could just throw a hundred bucks at it for a permanent solution. NSOR said they could make one for around $150 if I bring them a cover in good shape. Maybe one day I'll wander down the JY. What else has the same cover? S10/Blazer/Sonoma/Jimmy right?
The skidplate will have to wait until I sweet talk a friend. Until then I have to behave myself.
Right now the diff is my priority because it's making a mess. I'm tired of reworking it to make it seal, only to have it leak again by just looking at it the wrong way. It's cold out and I don't wanna work on the van very much. I was hoping I could just throw a hundred bucks at it for a permanent solution. NSOR said they could make one for around $150 if I bring them a cover in good shape. Maybe one day I'll wander down the JY. What else has the same cover? S10/Blazer/Sonoma/Jimmy right?
-
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: Differential cover
NSOR would just be paying someone to do what I said.timelessbeing wrote:NSOR said they could make one for around $150 if I bring them a cover in good shape. Maybe one day I'll wander down the JY.
What else has the same cover? S10/Blazer/Sonoma/Jimmy right?
I see Canadian tire has a 4.5 inch angle grinder on sale 60% off at 19.49. Right Now!
Other than a drill and a way to weld, thats all the tools you'll need most likely. That leave you about 80 bux to throw at your local welder to stick your pieces together.
And Yup, You can buy small bits of steel plate from a welder or a recyclers for cheep.
It wouldnt be hard to make some small pieces that you could then weld to a cover that you have, spare.
Sounds like you might want a skidpan for the very bottom of the diff to, with a bit of wrap to protect the bottom seal of the cover.
Have you looked on 4x4 websites to see the funky skids they put on bush-mobiles? They really protect the bottom of the diff and half way up the cover too, then just keep the stock cover.
You could Buy a brand new cover, or a good used one at the JY for a small price.
They used the 10 bolt on a million different GM cars and trucks, not just the astro/s10 families.
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
- ASV Supporter
- Posts: 418
- Joined: Wed Apr 06, 2011 7:01 pm
- Location: Woodbury, CT.
- Has thanked: 1 time
- Been thanked: 18 times
Re: Differential cover
I got a shiny new chrome cover off fleabay, $20 or so shipped IIRC.
'93 Safari shorty, 350 swap
'05 Astro AWD, lifted, 6 liter, cammed, ported and programmed for fast.
'93 cargo, work in progress
'05 Astro AWD, lifted, 6 liter, cammed, ported and programmed for fast.
'93 cargo, work in progress
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3115
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: Differential cover
Trust me ... condo ... not happening. I'll save that for when I get a house. If they even become affordable. Thanks for the pics though. I've never seen those kind of shields.doyoulikeithere wrote:It wouldnt be hard to make some small pieces that you could then weld...
Linky?WoodButcher wrote:I got a shiny new chrome cover off fleabay, $20 or so shipped IIRC.
-
- ASV Supporter
- Posts: 2060
- Joined: Tue Nov 17, 2009 8:27 pm
- Location: Misty Mountains of Cowichan BC.
Re: Differential cover
http://www.speedwaymotors.com/GM-75-Inc ... r,706.html
you need to email him first at foreignorders@speedwaymotors.com cuz yur Canadian eh.
Great store.
I find it hard to believe that your local NAPA or Lordco (ripco) don't have these in stock though......
you need to email him first at foreignorders@speedwaymotors.com cuz yur Canadian eh.
Great store.
I find it hard to believe that your local NAPA or Lordco (ripco) don't have these in stock though......
2021 Yamaha Tenere 700 - Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
2016 Yamaha XSR900 - Silver.
1990 Astro - AWD - Brown.
1987 Astro - With 5 Speed & 4wd - Silver & Blue.
-
Topic author - I have my van tatooed on my cheeks
- Posts: 3115
- Joined: Fri Aug 08, 2008 12:55 pm
- Location: The Pacific North Wet
- Has thanked: 47 times
- Been thanked: 25 times
Re: Differential cover
I wonder how thick the metal is. Probably the same as the stock , eh feller?doyoulikeithere wrote:http://www.speedwaymotors.com/GM-75-Inc ... r,706.html