Search found 7 matches
- Wed Mar 09, 2011 8:40 pm
- Forum: WHEELS
- Topic: Jeep Moab wheels
- Replies: 12
- Views: 9322
Re: Jeep Moab wheels
The new JK rims (07 and up) are 5x5. Backspacing is 6.25". Looking at spacers. Have spacers on both of our JKs. Needed them to clear the front sway bar with 35"s on the 2 door. If I go with 1.5" spacers I'll have 4.75" backspacing. Gotta see if spacers and a small lift will make ...
- Wed Mar 09, 2011 8:03 pm
- Forum: WHEELS
- Topic: Jeep Moab wheels
- Replies: 12
- Views: 9322
Re: Jeep Moab wheels
Looks like they are 17x7.5 wheels.
Tires are 255/75/17 bfg mud terrains.
Tires are 255/75/17 bfg mud terrains.
- Wed Mar 09, 2011 7:21 pm
- Forum: WHEELS
- Topic: Jeep Moab wheels
- Replies: 12
- Views: 9322
Jeep Moab wheels
I have a set of 17" jeep JK Moab wheels and decent bfg mud terrains. They are stock wheels/tires that come on the rubicons. I believe they are almost 32"s. http://www.quadratec.com/Assets/Images/95671/95671-lg.jpg Does anybody on here run JK wheels? What am I going to need to run this comb...
- Wed Mar 09, 2011 5:34 pm
- Forum: RUNNING ISSUES
- Topic: 1995 CPI won't idle, Timing? Vacuum? I screwed it up.
- Replies: 6
- Views: 3865
Re: 1995 CPI won't idle, Timing? Vacuum? I screwed it up.
WooHoo :cheers: Had a friend who is more knowledgeable than I stop by after work today to help out with the timing Before he got there I swapped out my fuel pump since with the original one fuel pressure would drop 60 to 30 and then down from there within less than a min or two. Wasn't really too ba...
- Wed Mar 02, 2011 8:53 am
- Forum: RUNNING ISSUES
- Topic: 1995 CPI won't idle, Timing? Vacuum? I screwed it up.
- Replies: 6
- Views: 3865
Re: 1995 CPI won't idle, Timing? Vacuum? I screwed it up.
I found a line coming from the canister on the drivers side going back (not sure where it goes, guess through firewall) that is completely off. Will fix that and see what happens. Also going to get cylinder #1 to TDC and reinsert the distributor. Then set the timing. Ive never messed with timing bef...
- Tue Mar 01, 2011 8:45 pm
- Forum: Welcome New Members
- Topic: 1995 Astro AWD LT in Elizabethtown, PA
- Replies: 3
- Views: 1765
1995 Astro AWD LT in Elizabethtown, PA
Recently bought a 95 Astro AWD LT. Lady was asking $1000. Ended up getting it for $500. New PA inspection in Dec. Runs and drives. 199,2xx miles The PO was using it to hall Amish workers but upgraded to a fullsize GM van. So, the interior needs some major cleaning. It is teal with grey interior and ...
- Tue Mar 01, 2011 8:38 pm
- Forum: RUNNING ISSUES
- Topic: 1995 CPI won't idle, Timing? Vacuum? I screwed it up.
- Replies: 6
- Views: 3865
1995 CPI won't idle, Timing? Vacuum? I screwed it up.
Finally got some things accomplished. Replaced the lower plenum gaskets, valve cover gaskets, upper gasket, cleaned all ports, egr, etc..., and started replacing vac lines. Started it today and it misses like mad and will only idle for a few seconds. Been reading a lot and I think I screwed up the t...