Chevy & GMC Vans

When I first got this van I was looking for pictures that could tell me how much room there was for a small fan setup behind the front grill. There were not many pictures so I thought I would share the pictures of both my transmission fan, radiator fan and the parts I used.

I completed this job a while ago but I recently had to change my old electric radiator fan out. At the same time I decided hook up the wires for the transmission fan for which I did not when I first installed it a couple of years ago?

This is just for visual and parts info. Please feel free to ask or pm any questions.

For the radiator I used:

Jegs: 134-75001 16" EURO HIGH TRQ FAN PLL

Summit: BCI-72054 BRACKETS ALUM ELECTR FAN qty4

Summit: Derale Performance Single Stage Fan Controllers DER-16738

Amazon: Spectra Premium CU1786 Radiator $107.45 + tax
For the Transmission fan I used:

Summit: BMM-70297 HI TEK COOLING SYSTEM
Summit: RUS-640610 Male Invert Flare To Female Adapter -6AN To 5/8 in. -18 qty1
Summit: SUM-220667B -6AN 5/8"-18 INVERTED FLARE BLK qty1
Summit: SUM-230610 S.S. HOSE -6 10FT

Bought from local store

Redhorse Performance -6 AN Male to 1/2" NPT Straight Adapter qty2
Redhorse Performance 90°-6 AN/JIC Swivel-Seal Hose End qty3
Redhorse Performance -6 Staight AN/JIC Swivel-Seal Hose End qty1

I know this is an old thread but just want to give props for a good/helpful write up

The transmission cooler setup looks super clean. Very nice.