Perhaps it was never connected and I imagined it connected when I took it out.. Thanks for the help guys!

Ah! it's just an accessory light wire? That would explain the random light bulb thats sitting behind there.. I'll just assume I don't need it? Thought it may have something to do with my 12v sockets/cig lighter..

:withstupid: I have a 98 cargo astro.. Took out my glove box to do some speaker and lighting wiring a week ago, disconnected the 2 connections from the glove box successfully. Upon putting it back in I noticed that the one connection(the smaller one with 2 prongs, not the cube looking one) does not ...

yesterday I realized my brights weren't working when i tried to turn them on, idiot light for brights doesn't come on either. Then today when I started up, the light relay was buzzing, so I went to the store, replaced it and it still buzzed. The relay buzzes when I attempt to turn the brights on but...

Thanks I'll give it a go! Took a look at the headlight switch.. I think the white and black wires should do.. We'll see.

I have a freshly picked windshield visor from my local junkyard, it has about 7 yellow running lights over the top of it.. I was unable to find where exactly the wire was ran to when I took it out.. I'm assuming the wires (+/-) should run to the headlight switch to turn on when the headlights do.. i...

you don't say! I replaced it once when the circular knob came off, however I got it used off ebay.. perhaps I'll make a trip to a junk yard

1. Fuses are in tact. 2. Idiot lights come on. 3. Climate lights are out, and my radio is an aftermarket upgrade (that works). 4. Thumbwheel lights my dome lights, and when i turned it down past the lower notch the dash/climate lights used to come on, but eventually started to flicker and then all w...

oh, it's a 98 astro for the record.

my dash lights are out and rather than finding what the problem is in the mess of wires.. I have 2 LED strips that I plan to put in the dash to fix the problem.. however I am unsure where the splice in the wires. I'm assuming the headlight switch would be easiest, but I don't know what wire goes to ...

That would be simplest but.. I have that wire connected to my radios memory.

Your ignition switch is located on the steering column. Note that I said ON and not IN. Remove the under dash trim panel. You'll see the bracket holding the column. DON'T loosen those nuts just yet. At the base of the column under a flap are four 10mm hex screws holding the column to the firewall. ...

I just want to run from my amp's remote terminal a wire to my ignition, so it turns on when my van turns on. Don't know where the ignition is.

I want to run a remote wire from my 1000w kenwood amp in the back to my ignition switch so I can wire in a cut off switch in my dash just in case I need my 12 in. kenwood subs off. I already have a small hole in my fire wall where my auto starter/alarm and amp power wires run. :rolleyes: So, Where i...