32x11.5 BFG Mud Terrains ....Will they fit?

97CargoCrawler · Post by **97CargoCrawler** » Fri Mar 07, 2008 12:20 am

Hey folks! Just wondering if anyone has run 32x11.5 BFG Mud Terrains with Overlands 4-5" lift on a 2wd van. I just purchased 4 new BFG 235-75's 2 months ago and really wish I had gone bigger. Can't afford to buy another set that I can't return so I figure I had better ask.

My proposed spec's:
1997 2WD Safari
2" body blocks, 3" HD front coils, rear add-a-leafs and Overland shackles
15x8" Pro Comp Allloys with 3.75" backspacing and -19mm offset

peter · Post by **peter** » Fri Mar 07, 2008 2:38 am

Nope. 30-31 inchers will prolly rub a bit here & there unless you take out the hammer or grinder to places like the rear of the front wheelwells. Also, I don't think a 11.5 inch tire is approved for use on an 8" rim. However, I believe I've been corrected by Dean on this in the past.
I'm running 325/60 R-15's which comes out to roughly 31" x 12.5. Custom rims up front, 5" welded steel bodylift spacers on the subframe and 5" blocks out back. It's fine for street driving, never rubs. I dunno what'd happen off-road, though :-k

LiftedAWDAstro · Post by **LiftedAWDAstro** » Fri Mar 07, 2008 4:26 am

The 8" wheel is fine. The 32's will fit if you hammer the hell out of the wheel wells. I ran 32's on the SPB and because of the wheeling we did, I used a 3# sledge to essentially move the rear of the front wheel well back about 2" - 3". With the wheels you are using having the offset to move them out almost 1", you WILL get a lot of rubbing! Nothing a hammer or sawzall can't fix!

97CargoCrawler · Post by **97CargoCrawler** » Fri Mar 07, 2008 7:37 pm

Glad I asked! Maybe I'll buy one and try it on to see what needs trimming. Has anyone fit a Bushwacker cut out style fender flare from another vehicle on their van?

Thanks for the info guys!

mdmead · Post by **mdmead** » Fri Mar 07, 2008 8:57 pm

97CargoCrawler wrote:Has anyone fit a Bushwacker cut out style fender flare from another vehicle on their van?

Yeah Petey, how'd that work out for ya?!?!

peter · Post by **peter** » Sat Mar 08, 2008 4:49 am

Another one of my better investments, thanks fer bringing it up

The fronts will drive you up a wall. Because of the front edge of the front doors. Forget about it. Either fibreglass yourself a custom set or take the cowardly way out as I did and play with the backspacing so's to tuck 'em in as much as possible.

phr1$k37 · Post by **phr1$k37** » Wed Mar 12, 2008 9:46 am

peter wrote: It's fine for street driving, never rubs. I dunno what'd happen off-road, though :-k

What!? I nearly flipped off my chair!!! Petey!? What kind of Canadian are you!? I really thought you had taking that mudding and stuff - ack my imagine of you has just changed yet again!!! ah crap ... flash back of a bike + dress. blah gave you too much credit

T.Low · Post by **T.Low** » Wed Mar 12, 2008 9:55 am

LiftedAWDAstro wrote:The 8" wheel is fine. The 32's will fit if you hammer the hell out of the wheel wells. I ran 32's on the SPB and because of the wheeling we did, I used a 3# sledge to essentially move the rear of the front wheel well back about 2" - 3". With the wheels you are using having the offset to move them out almost 1", you WILL get a lot of rubbing! Nothing a hammer or sawzall can't fix!

dang it,man! Thats all bad stuff for me to know. Hmmm (smoke rising from ears as I think about this new information...)

LiftedAWDAstro · Post by **LiftedAWDAstro** » Wed Mar 12, 2008 3:46 pm

phr1$k37 wrote:What!? I nearly flipped off my chair!!! Petey!? What kind of Canadian are you!? I really thought you had taking that mudding and stuff - ack my imagine of you has just changed yet again!!! ah crap ... flash back of a bike + dress. blah gave you too much credit

Oh he did take it off-road...once...

He thought he could....

phr1$k37 · Post by **phr1$k37** » Wed Mar 12, 2008 3:53 pm

Yah! I remember see photos like that! I know there a few more but ok .. one time is better than none.

Makes me think how Smurf got those large tires mounted eh?

peter · Post by **peter** » Thu Mar 13, 2008 2:09 am

I've taken brand new 4x4's off the lot and driven them straight into muddy fields. Trust me, I've done my part. The pics above prove that some types of activities are better left for those properly equipped. Like Deano.

PS: Those pics were taken running my 325/60's. My l'il 4.3 awd couldn't even spin a tire trying to get unstuck. It was.....humiliating

phr1$k37 · Post by **phr1$k37** » Thu Mar 13, 2008 7:54 am

Oh that was the motor swap? ;p
BTW what were you stuck on / in? I cannot tell from the photo.

LiftedAWDAstro · Post by **LiftedAWDAstro** » Thu Mar 13, 2008 12:19 pm

He was high-centered in the ruts and that wimpy 4.3 didn't have the balls to spin 'em!

phr1$k37 · Post by **phr1$k37** » Thu Mar 13, 2008 3:07 pm

LOL ... hey whimpy 4.3L So what do you, I, T.Low and others who go off-road have then!? $\:D/$

LiftedAWDAstro · Post by **LiftedAWDAstro** » Thu Mar 13, 2008 3:34 pm

SKILLS

Chevy & GMC Vans

Chevy & GMC Vans

32x11.5 BFG Mud Terrains ....Will they fit?

32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?

Re: 32x11.5 BFG Mud Terrains ....Will they fit?