Page 1 of 1
Changes cam sensor, won't start
Posted: Sun Feb 06, 2011 7:00 pm
by luvmyastro
I was getting a chech engine light code p0341. Possible cause cam sensor. I changed the cam sensor, dist cap rotor and all plugs. It will not start but fires back like timing is off. Do I need to relearn ICM. Any advise willbe appreciated.
Re: Changes cam sensor, won't start
Posted: Mon Feb 07, 2011 3:37 pm
by Cobra
did you get the right firing order on the plug wires that would be the most likely possiblility
viewtopic.php?f=4&t=35
Re: Changes cam sensor, won't start
Posted: Mon Feb 07, 2011 6:59 pm
by luvmyastro
Yes, I have checked and double checked. I will try again because it seems like a timing thing to me, backfires like timing or reversed plugwire. got spark to the plugs so it has to be something stupid like that.