I have a TBI engine in a 1992 GMC Safari, I want to hook up my aftermarket tachometer but I have no idea what goes where red = +
Black = Ground, Green is probably lights and white must hook to something in the ignition but what?
What do I hook my tach too on the ignition?
-
dj_joker_2002
Topic author - I finally get the smurf thing
- Posts: 134
- Joined: Wed Sep 13, 2006 3:19 pm
- Location: New Hampshire
- Contact:
-
mikedamech
- I finally get the smurf thing
- Posts: 121
- Joined: Sat Jan 05, 2008 11:32 pm
Re: What do I hook my tach too on the ignition?
Green is ground all around.
98 Astro with a 95 LT1
94 Astro stock w/Flo master.
94 Astro stock w/Flo master.
Re: What do I hook my tach too on the ignition?
DJ, if you google the manufacturer of your tach, I'm sure there will be a website that will have the color code of the tach wires on it. That's how I found out which wire was which on the Sun Super II tach I had laying around .
Re: What do I hook my tach too on the ignition?
Most tachs are
Black=ground
Green=lights
White= dist feed
red= power from ignition
There should be a white coming out of dist or coil, I believe you jump one of those to feed tach, but check with someone else here!!!!
Black=ground
Green=lights
White= dist feed
red= power from ignition
There should be a white coming out of dist or coil, I believe you jump one of those to feed tach, but check with someone else here!!!!